Just on the first site- did you read down to this comment?
Regarding the way the Great Pyramid worked, here they are very important facts and hints put together:
In the Great Pyramid, hydrogen was produced. See stone plugs with electrodes found in the tunnels going from Queens Room: http://www.gizapower.com/Articles/door2.html
Also, water was pumped inside the pyramid from the underground well, for hydrogen production via electrolysis and/or for producing sounds of different frequencies in a water whistle which was comprised of the Kings Ante-Chamber and the Great Gallery. Maybe the huge granit stones from over the Kings Chamber helped producing specific sound frequencies, by resonating to the prime sound.
The Kings Chamber + Great Gallery were designed as a very good resonator for specific sound frequencies. The Kings Coffer resonates at 438 Hz. I suppose that thy pyramid was NOT collecting Earth`s vibrations for transforming them in sounds, as Christopher Dunn proposes, but sounds produced in the pyramid caused the vibration of the limestone blocks for the purpose showed a little later.
The recently published work of Doctors Haisch and Moddel, the device proposed by BlackLightPower as resumed on the website http://byzipp.com/energy/blog2.php speak for the production of energy from the ZPE quantum field via 2nm calcium spheres shielding hydrogen molecules from the action of the virtual particles of the ZPE field.
So, I propose that the way of extracting energy in the Great Pyramid was something like this:
a. hydrogen was produced by chemical reaction or by electrolysis in the Queens Chamber and was diffused through the tunnels inside the limestone blocks of the pyramid body, thus enriching the blocks with hydrogen and pressing many hydrogen atoms inside the calcium spheres. I remember that Thomas Trawoeger said once on his forum that only pyramids covered with gypsum plates will work. Gypsum plates contain calcium.
b. in the same time or after the production of hydrogen, strong sounds came into play comprising many frequencies at the same time. Lower frequencies caused the whole pyramid body to vibrate, thus creating the sensation of an alternating magnetic field from the Earth magnet field. Higher sound frequencies were maybe used for the extracting of the hydrinos formed inside the calcium spheres.
c. somehow all these actions caused the creation of an immense HEAT inside the pyramid, especially in the Kings Chamber. Remember the meaning of the greek word PYRA-MID: pyra=fire and mid=middle. So, PYRAMID means FIRE IN THE MIDDLE, the ancient greeks knew that. I don´t know how the builders of the pyramids collected and used the energy thus created.
I hope that someone with more technical knowledge and financial means can make a working modell based on this assumption. And please, post the results here. Normally when somebody has something of great value, tries to sell that thing to the highest bidder, as Thomas Trawoeger did. Let`s hope that the next Thomas Trawoeger will make the sacrifice and post his results for free, for the benefit of the Nature, if not for the benefit of the mankind.
No, I didn't read the whole way down, but it doesn't surprise me. I've read where some researchers don't believe the pyramids were built for the purpose of tombs. This makes perfect sense when you look at all the evidence. Who is going to go to all this trouble just to bury a body -- even a royal body? A power source, however, makes more sense. I was reading somewhere online where there are ancient buildings all around the world with similar appearances and at specific locations relative to one another. This makes me think of Tesla. What if the pyramids generated electricity and the buildings were used for transmitting this power to other locations.
If the pyramid was a great source of electrical power, then one can see why the illuminati chose the pyramid as their symbol of power.
Oh, I also remember reading about a theory where the cap of the pyramid was made of gold...here it is:
I like the idea of gold caps to the pyramids, that could be why 'they' cover themselves in gold at every chance they get- the blue/white (Tut's headband etc) and the gold pyramid cap covering.
Also, there seemed to be civilisations that could achieve plating through alchemical/transmutation means:
"The size and precisely tooled geometric forms of the golden object (above) suggest its practical use in some sort of mechanical operation, as some sort of heavy tool held with two hands like a rolling pin for dough-making used today, but without the spinning axle."
First off, you don't coat an everyday tool in pure gold. Second, there's no way this is for a mechanical operation, as pure gold is too soft. Thirdly, when was the last time you saw a rolling pin with such curvature? Most are cylinders. Even a French rolling pin doesn't have that much curvature. Also, who would want to try to scrape out fruit or whatever from between those grooves? You'd have a lot more than light wear marks just from that alone.
I looked online for another example of an "ayurvidic soma press" and came up empty-handed. Looks like they pulled this out of their nether orifice.
More likely, it's an electrical conductor of some sort. Wanna bet it'll set up a magnetic field? Two ends, two contact points., two poles, one crazy-looking magnetic field.
Dunno, did you read the purpose behind it was to consume the gold aggregated with the essential oils produced by the plants ground beneath it? It's like monoatomic gold, produces numerous 'interesting' effects if done properly.
Other sauce confirms the use of monoatomic gold for enhancing the person to 'adept' status, sounds risky.
The point being all of this could be hooey, but most of his stuff checks out in multiple sauces when I've looked around (I know this means nothing, peer reviewing feels similar).
Not saying it's the likeliest thing, but I can see it- hands coated in oil causing less friction but chemical disaggregation in the hands and in the pan oils, consuming the gold in the safest form- if what they say about the function of gold is true that is. If not, you're likely right.
Just on the first site- did you read down to this comment?
In the Great Pyramid, hydrogen was produced. See stone plugs with electrodes found in the tunnels going from Queens Room: http://www.gizapower.com/Articles/door2.html Also, water was pumped inside the pyramid from the underground well, for hydrogen production via electrolysis and/or for producing sounds of different frequencies in a water whistle which was comprised of the Kings Ante-Chamber and the Great Gallery. Maybe the huge granit stones from over the Kings Chamber helped producing specific sound frequencies, by resonating to the prime sound.
The Kings Chamber + Great Gallery were designed as a very good resonator for specific sound frequencies. The Kings Coffer resonates at 438 Hz. I suppose that thy pyramid was NOT collecting Earth`s vibrations for transforming them in sounds, as Christopher Dunn proposes, but sounds produced in the pyramid caused the vibration of the limestone blocks for the purpose showed a little later.
The recently published work of Doctors Haisch and Moddel, the device proposed by BlackLightPower as resumed on the website http://byzipp.com/energy/blog2.php speak for the production of energy from the ZPE quantum field via 2nm calcium spheres shielding hydrogen molecules from the action of the virtual particles of the ZPE field.
So, I propose that the way of extracting energy in the Great Pyramid was something like this:
a. hydrogen was produced by chemical reaction or by electrolysis in the Queens Chamber and was diffused through the tunnels inside the limestone blocks of the pyramid body, thus enriching the blocks with hydrogen and pressing many hydrogen atoms inside the calcium spheres. I remember that Thomas Trawoeger said once on his forum that only pyramids covered with gypsum plates will work. Gypsum plates contain calcium.
b. in the same time or after the production of hydrogen, strong sounds came into play comprising many frequencies at the same time. Lower frequencies caused the whole pyramid body to vibrate, thus creating the sensation of an alternating magnetic field from the Earth magnet field. Higher sound frequencies were maybe used for the extracting of the hydrinos formed inside the calcium spheres.
c. somehow all these actions caused the creation of an immense HEAT inside the pyramid, especially in the Kings Chamber. Remember the meaning of the greek word PYRA-MID: pyra=fire and mid=middle. So, PYRAMID means FIRE IN THE MIDDLE, the ancient greeks knew that. I don´t know how the builders of the pyramids collected and used the energy thus created.
I hope that someone with more technical knowledge and financial means can make a working modell based on this assumption. And please, post the results here. Normally when somebody has something of great value, tries to sell that thing to the highest bidder, as Thomas Trawoeger did. Let`s hope that the next Thomas Trawoeger will make the sacrifice and post his results for free, for the benefit of the Nature, if not for the benefit of the mankind.
Um. Wow.
No, I didn't read the whole way down, but it doesn't surprise me. I've read where some researchers don't believe the pyramids were built for the purpose of tombs. This makes perfect sense when you look at all the evidence. Who is going to go to all this trouble just to bury a body -- even a royal body? A power source, however, makes more sense. I was reading somewhere online where there are ancient buildings all around the world with similar appearances and at specific locations relative to one another. This makes me think of Tesla. What if the pyramids generated electricity and the buildings were used for transmitting this power to other locations.
If the pyramid was a great source of electrical power, then one can see why the illuminati chose the pyramid as their symbol of power.
Oh, I also remember reading about a theory where the cap of the pyramid was made of gold...here it is:
https://otherworldmystery.com/where-is-the-capstone-of-the-great-pyramid
Everyone knows what a good conductor of electricity gold is.
Definitely more pyramids, I think piezo-electric monoliths once covered many places on earth, here's one in Bosnia:
http://www.human-resonance.org/visoko.html
I like the idea of gold caps to the pyramids, that could be why 'they' cover themselves in gold at every chance they get- the blue/white (Tut's headband etc) and the gold pyramid cap covering.
Also, there seemed to be civilisations that could achieve plating through alchemical/transmutation means:
http://www.human-resonance.org/Nahuange_Alchemy.pdf
And this, if true, is just mind-blowingly incredible, links in to the Bible too:
http://www.human-resonance.org/soma_press.html
LOL! Gaslighting at its finest:
"The size and precisely tooled geometric forms of the golden object (above) suggest its practical use in some sort of mechanical operation, as some sort of heavy tool held with two hands like a rolling pin for dough-making used today, but without the spinning axle."
First off, you don't coat an everyday tool in pure gold. Second, there's no way this is for a mechanical operation, as pure gold is too soft. Thirdly, when was the last time you saw a rolling pin with such curvature? Most are cylinders. Even a French rolling pin doesn't have that much curvature. Also, who would want to try to scrape out fruit or whatever from between those grooves? You'd have a lot more than light wear marks just from that alone.
I looked online for another example of an "ayurvidic soma press" and came up empty-handed. Looks like they pulled this out of their nether orifice.
More likely, it's an electrical conductor of some sort. Wanna bet it'll set up a magnetic field? Two ends, two contact points., two poles, one crazy-looking magnetic field.
Dunno, did you read the purpose behind it was to consume the gold aggregated with the essential oils produced by the plants ground beneath it? It's like monoatomic gold, produces numerous 'interesting' effects if done properly.
Other sauce confirms the use of monoatomic gold for enhancing the person to 'adept' status, sounds risky.
https://educate-yourself.org/cn/monoatomicgoldthinktwice15aug05.shtml
The point being all of this could be hooey, but most of his stuff checks out in multiple sauces when I've looked around (I know this means nothing, peer reviewing feels similar).
Not saying it's the likeliest thing, but I can see it- hands coated in oil causing less friction but chemical disaggregation in the hands and in the pan oils, consuming the gold in the safest form- if what they say about the function of gold is true that is. If not, you're likely right.