https://youtu.be/aWNzq9OWGmY?si=MwIbegPXjuQ-f_0m
A very interesting lecture if you have the time to listen to it. She has an interesting book too.
She talks about how it was physically impossible for the twin towers to collapse in the way we were told when hit by a plane, and that it was likely directed energy weapons responsible for the destruction of the buildings.
This is one of the most convincing takes I've ever heard on how the towers collapsed.
That was an off-the-cuff remark. The collapse was a collapse, not a series of detonations.
I just want to add something here on the detonations that the above person and I referenced...
The explosives that are used in perforating VERY THICK oil well casings...the name used for such explosives are "shaped charges". They can be set against any tube or column and can "shear" the column at that point.
Shear means at that point of where the explosive is the column is "sheared" by a SLUG that perforates the column...The VERY HIGH TEMPERATURES OBTAINED when the device goes off "MELTS" steel at that point.
https://www.drillingmanual.com/well-perforation-methods-techniques-in-oil-gas-completion/
Also, a DIRECT ENERGY WEAPON must be ONSITE and functioning WITHOUT ANY THOUGHT OF BEING SEEN!!!!...There have been pictures taken of the buildings around BLDG 7 AND NO SUCH DEVICE WAS FOUND!!!!
I've got no problem with the absence of DEWs. I've always maintained the idea was bonkers.
I understand shaped charges. But they do not leave residue that can be confused for thermite. And a perforation does not equal a shear across the entire column. You can punch holes in column webs without losing the majority of strength. But perhaps you mean a linear shaped charge, which produces a line perforation. It would still be an explosion, and the observed collapse was only a collapse with no explosive signs.
KSP (great name)...the charges from the film that I saw, were going going off floor-by-floor and one can see the charges going off in a LINE across one side...
Now back to what you were saying...too lay that much charge for each side of the building and then the height would take an inordinate amount of explosives even using explosive in a linear fashion would be out of the realm of weight...
The company I worked in Texas, would fill boxes with 100 of these things AND they had different sizes for the casings...so, they would have know (which was obtained from the NYC Building Department: THE NUMBER OF COLUMNS THE SIZE OF SAID COLUMNS HOW MANY COLUMNS ON EACH FLOOR...
From the video that I saw and the other commenter, the building started it's collapse in the MIDDLE, NOT on the outer ages...and the video clearly shows the charges going off around each perimeter first and once the perimeter started the inner charges went off...thus guaranteeing the whole building feel on itself...
VERY Good THOUGHT PROCESS that has come out of this...OUTSTANDING!!!!!!!! AND THANK YOU!!!!!!
You're welcome. Are you aware that the windows will burst from the effects of an apparent explosion? Upper floors collapsing onto a lower floor will compress the air. If the volume is reduced by half, the increased interior air pressure on the windows will be about a ton per square foot (~15 psi). Reduced by 2/3rds, it will be two tons per square foot (~30 psi). Every collapsing floor would look like that.