Tired of your "I DID THAT" stickers being removed? Hit 'em with some clearcoat spray like this.
(www.amazon.com)
LET'S GOOoOo
You're viewing a single comment thread. View all comments, or full comment thread.
Comments (47)
sorted by:
I am upset that all of my - Everything Woke Turns to Shit / Trump 2024 or Sooner stickers keep fading. No one takes them down as I made a 3ft sticker slapper to get them nice up high where either a ladder or lerch is needed to mess with them.
Good idea on the clear coat. There is a product called pur15 that I used to use on car frames, stuff can take a hit with a sledge hammer and not break.
The por 15 is not as good as it used to be. They changed the formula a few years ago.
When it first came out,I used it on a cars frame. You could legit hit it with a hammer.wouldnt even scratch it. I walked around for 6 months with black stains all over face,arms and hands. I bet the spot on the shop floor is still there 20 something years later.
This new stuff must be topcoat or it'll turn chalky white. If you get it on you or the floor.wait 10 minutes and peel it off.
There is a chassis paint for big trucks that works like the original por 15. I forget the name of it though.
Thanks for the info. I will look into other products if I ever get another project to restore.
Do they sell sticker slappers online? Are you talking about one of those grabbers by chance?
I took a 3' piece of garden bamboo. Then took a like a 3x5" piece of plastic. Heat gunned the plastic to make about 1/2" bendable tabs. Heavy duty black gorilla tape the plastic to the stick.
For use, I peel the back of the sticker and reverse face it so that only the 1/2 tabs touch the sticky part. Slap it up high & push upwards after contact. Use the back side of the slapper to push any part of the sticker that is still no down.
Got the idea from: https://www.youtube.com/watch?v=TtB34UMA2S8&t=103s
I am not aware of any place selling these.
You could make some bank if you sold them on Etsy.