So in light of UFOs being demonstrated well enough to exist for me to accept they are real and they fly, I've become interested in figuring out how to get the energy needed to do what they do.
Doing this has led me down the rabbit hole of reading old patents and old theory to see if there is a branch of science that got neglected for some reason or another.
In the investigation, it leads me to electrostatic machines.
Now these are interesting.
They are typically made using 1 nF Leyden jars and they can make megavolts of electricity with the right set up.
Regardless, I'm watching this YouTuber turn his machine by hand and it starts throwing 6 inch sparks every 2 seconds.
I ran the numbers and that's 457 kilovolts to jump that far. At 1 nF that works out to 200 watt-seconds per spark.
So an average of 100 watts per second as an average.
He's spinning it with his hand, when he stops, it takes a good 15 seconds for friction to stop the wheels. I have serious doubts that something that could be spin with one extended finger uses 100 watts to run.
The motion of the wheels are really only being affected by friction. In span the same way in an early part of the assembly video when none of the electrical components were attached.
This is an electron pump in the same way as an air conditioner has a heat pump.
I think high voltage electrostatics is the key to efficiently separating charge so that you can do other work. There's basically almost nothing for me to research about these things. They aren't even conspiracy level, they're just assumed useless outside of being a demo of high voltage and abandonned as a technology.
The only place I can see where they use it is in high voltage experiments, everything always comes with the discalmer that the watts made by these machines are uselss because it's high voltage and low amperage, like step down transformers and power conditioners don't exist.
They are also super, rediculously dangerous with big capacitors and can kill you in an instant by striking you with lighting from a distance of inches!
Edit:
- Edited because I wrote uF instead of nF.
- Added link to video series on how to make this particlular type of electrostatic machine from beggining to end including a working demo. (I assume he makes them as demo units for universities) https://www.youtube.com/watch?v=3kMQJk8HZZg&t=2899s
- A comparison of how hard it is to make 700 watts of power through electromagnetics https://www.youtube.com/watch?v=S4O5voOCqAQ
- Calculations by me can be found in the comments bellow
The ones that can do that have alternate means of propulsion. These use gravity to make a funnel in any point around the craft. Essentially warping space in which direction they wish to move. They then move because essentially it’s falling into the space gap they have created. This system can be moved 360 degrees all around the craft and aimed to move the craft. Crafts built with photonisers. Essentially a device that makes the whole ship vibrate at much higher frequencies that the object begins to act as a light particle. And gravity begins to have less and less affect the higher the vibrations. Extreme vibrations are another form of anti gravity. There are several designs with different tech in these craft, changed and made better as the decades pas.