I have a well. I would be able to run that well as long as I have gas to run generator. Also have a backup generator I got for free.
As far as putting down the well. I have a est 15-20K gallon pool. I bought a Harbor Fright 2 in. pump, and a length 2 in. pvc. Dropped one end of pvc into pool and ran out to pump, at well location.
I washed and drove down about 25 ft. of 2 in. pvc for my casing. The used 1 in. the drill out/clean sand inside of casing. Then I used that same 1 in. as my well pipe. Put a sand filter at end, put if down about 25 ft. which is near max draw depth for pitcher pump.
My drawdown is not that good. Mistake I made was I pushed the casing through ideal good sugar sand into a layer of clay. Probably got plenty of water, but clay is not a permeable so it's hard to get good water flow. I should have put some holes in casing at certain levels.
I have a well. I would be able to run that well as long as I have gas to run generator. Also have a backup generator I got for free.
As far as putting down the well. I have a est 15-20K gallon pool. I bought a Harbor Fright 2 in. pump, and a length 2 in. pvc. Dropped one end of pvc into pool and ran out to pump, at well location.
I washed and drove down about 25 ft. of 2 in. pvc for my casing. The used 1 in. the drill out/clean sand inside of casing. Then I used that same 1 in. as my well pipe. Put a sand filter at end, put if down about 25 ft. which is near max draw depth for pitcher pump.
My drawdown is not that good. Mistake I made was I pushed the casing through ideal good sugar sand into a layer of clay. Probably got plenty of water, but clay is not a permeable so it's hard to get good water flow. I should have put some holes in casing at certain levels.