Take it or leave it. I'm giving away the keys to energy freedom for free. I'm going to do my best not to respond to critics because I am right and I don't need to argue. (But I'm not perfect and I can be a victim of temptation)
Accomplishing unlimited free energy is actually very simple and it was staring us in the face for 150 years via power generation devices that weren't even hidden. They hid them in plain sight right in the electrical engineering classroom. I know because I actually had one of the key devices in the classroom at my college, I was told it was useless by idiots.
There are three key ingredients in achieving unlimited free energy:
- Capacitors
- High Voltage (high tension)
- Electrostatics
To understand this you need to understand how a capacitor is rated. It is rated using a unit called the farad. A capacitor that is rated to 1 farad will hold 1 coulomb (6.24e18 electrons) of charge when 1 volt is applied accross the terminals. The formula for this is Q = C / V where Q is in farads, C is charge and V it elevtromotive force (volts)
1 amp-second is defined as 1 coulomb of charge moving past a given point in a circuit averaged over 1 second.
1 watt second is 1 amp second delivered at 1 volt of electromotive force, a watt second can also be called defined as 1 joule of energy as 1 joule = 1 watt second.
Therefore if I charge a 500 nanofarad capactor to 1 volt, the capacitor will contain 500 nanocoulombs of charge. When you discharge the capacitor the average voltage over the discharge is 1/2 the maximum voltage that the capacitor obtained.
So the total amount of work you could extract from a 500 nF capacitor when charged to 1 Volt discharged over 1 second can be defined by the formula P = I * 1/2 V = 5e-7 A * 0.5 V = 2.5e-7 Watt seconds. A very low number, negligible power.
That's if we charge it to 1 volt. What if we could charge it to 450,000 volts? How much work could I do with the energy in the capacitor then?
C = V * Q = 4.5e5 V * 5e-7 F = 0.225 coulombs.
If I discharge that over 1 second, that's 0.225 amp seconds and the avergage voltage of the discharge will be 225,000 volts.
Plug that into the power formula and you get P = I * V = 0.225 A * 225,000 V = 50,625 watt seconds or 50.625 kilojoules if you prefer to call it joules instead.
50,625 Watt seconds / 3600 seconds per hour = 14.0625 watt hours.
This is a much nicer level of charge, but in order to get it, we have to provide extremely high tension and current tranformers have efficiency losses and then you have to rectify the output, or you have to step it up with flyback transformers and even then you still have to supply all the current to the primary to get the voltage out of the secondary.
It's clear that you cant get free energy that way.
But what if you had a low effort way of generating high voltage?
This is where electrostatics come in. Most people are aware of Van Der Graaf generators, these are machines that use friction with the triboelectric to generate static electricity. They can generate millions of volts at a low current level, but they aren't good enough.
There's a different type of electrostatic generator that doesn't use friction, but uses pure electrostatics to work. It's called an electrostatic influence machine.
The most powerful variety I am aware of is of the bonneti and wimshurst designs. Wimshirst machines are actually very popular demonstration devices in classses. They have counter-rotating disks and very little friction and produce currents that are many times greater than a Van Der Graaf generator for the same amount of effort to opperate.
It the following video you can see an example of opperation. https://www.youtube.com/watch?v=Tb-T8UtqbpM
Each and every one of those sparks in the video is 2.5 Joules or 2.5 Watt seconds. He states that he has 500 picofarad capacitors and that his voltage is 100,000 volts with that arc distance set.
Let's check the math.
1e5 V * 5-e10 = 5e-5 coulombs, over 1 second, 5e-5 Amp seconds 5e-5 A * (1e5 V / 2) = 5e-5 A * 5e4 V = 2.5 Watt seconds or 2.5 Joules
Math checks out.
Now it's important to understant what a Leyden Jar is because it's just a simple capacitor made out of glass bottle and some metal. The important thing to know is that a jar with 568 ml of capacity has an typical capacitance of 1 nanofarad.
The reason the previous set up had 500 picofarads of capacitance is because 2 jars are used in series and the capacitance of two capacitors in series is equal to the reciprocal of the sum of reciprocal capacitance of the capacitors in series, or simply, Q = (1^-1 nF + 1^-1 nF)^-1 = 500 pF.
Knowing that: we know that if we see a layden jar that is that big or bigger, we can resonably estimate that it is a 1 nF capacitor.
This bring me onto the next part to show you. Fast forward to 38:55 for the action to start: https://www.youtube.com/watch?v=3kMQJk8HZZg&t=2578s (new, better designed machine, different video, different builder)
We can be overly conservative after he switches to his bigger jars and say that his leyden jars aren't well designed and he needed his bigger jars just to get to 500 picofarads.
Now, he set's his spark distance to 6.25 inches.
The breakdown voltage of air at sea level is 30,000 volts per centimeter. We'll assume he is at sea level.
6.25 inches = 15.875 centimeters
15.875 * 30,000 Volts = 476,250 Volts.
So how much charge does his capactor bank store then?
C = Q * V = 5e-10 * 4.7625 e5 = 2.38125 e-4 coulombs, if disharged over 1 second that's 238.125 microamp seconds.
That doesn't sound impressive until you calculate power.
P = I * V = 2.38125 A * (476250 V / 2) = 56.7 watt seconds per spark, those are 56.7 joule sparks!
Why does this matter?
Well he's producing those sparks at a frequency of about 1 spark per second once he get's his wheels spinning to speed. That's 56.7 Joules per second or 56.7 Watts per second.
A typical basic battery opperated hand drill has a wattage rating from 25-100 watts.
It does not take that much energy to spin these disks. If you attached the same handle to the end of a 56.7 watt PMDC motor is tuned to run at 120 rpm (about the maximum speed the builder turned the handle) produces roughle 3.3 foot punds of tourque.
It doesn't take 3.3 foot pounds to turn those wheels.
If you need more proof of the power these machines generate because this still isn't good enough for you, here's more evidence by using the power directly with an corona discharge motor: https://www.youtube.com/watch?v=vDRCKVUO8vw&t=195s
He's using a weak ass (by comparisson) Van Der Graaf generator to power a corona discharge motor, to power a 7/8 spade bit to drill through plastic and wood.
IOW.
You know what to do now.
It's easy and any one who is willing to do a little home manufacturing can get this done TODAY.
Don't trust me, build it yourself, see it for yourself.
PEACE!
EDIT: One remark for the conservative skeptics. Regardless of whether or not these machines are best describe with an efficiency number or a COP rating doesn't really matter.
My point for you conservative skeptics is that you can build these out of cheap and readily available materials. Something that's harder to say for an electromagnetic generator.
One way or another, your average person could build themselves one of these machines and then copy the designs for the atmospheric motor in the third video and they can generate power that they didn't have to pay any one for with machines that a high school student from could put together.
Even if they have to power it with water, wind or whatever else. Regardless of your opinion on COP, we're on the same side.
TL;DR: what's the energy source? Magic?
For crying out loud man! Nicola Tesla described free energy in his scientific papers back at the turn of the century before they were confiscated by the predecessor of the CIA. Trump’s Uncle, who was an electrical engineer was put in charge of reviewing Tesla’s work.
I remember him wanting to broadcast wireless power for no monetary cost. For "free". I don't recall power without a source. Got a link?
https://www.nuenergy.org/nikola-tesla-radiant-energy-system/
Oh my. This rings a bell, something I'd forgotten. Thank you.
The man was ahead of his time and I'm a huge fan, but he missed on this one. Part of this sounds like trying to capture energy from neutrinos. If the plan starts with energy from a fast moving neutral particle that's so difficult to interact with that it's very existence was in dispute, it doesn't look good as an energy source in the foreseeable future.
The atmospheric energy is a thing. Capturing it on a large scale doesn't seem practical... I'm no tree hugger, but even if we could out might be a bad thing.
A little off topic, none of this is necessary. Thorium breeder reactors can provide all the clean energy humanity will ever need until the earth is engulfed by the sun. We have a real solution. All we need to do is use it.
And he concluded there was nothing there to note. You did not answer the question, did you? Toward the end of his life, Tesla talked a good story. But he also did not believe in the atomic theory (matter is made of atoms), so you can't take him as in infallible prophet.
Trump's uncle concluded "publicly" there was nothing to note. Also, while atomic theory is great, we now know there are substructures below the atom. Perhaps that's how tesla's mind worked. He skipped past matter and went straight to quantum. I agree, he is most certainly fallible.
He didn't believe there were such things as atoms. Atoms are pretty fundamental to the existence of matter, subatomic particle notwithstanding. They are the foundation of chemistry. On this, Tesla was ignorant in a very dismissive way. I admire Tesla, but to promote him to the level of a prophet or wizard is very misplaced, to say the least.
What “question” that I didn’t answer are you referring to?
Elcycs: TL;DR: what's the energy source? Magic?
I think it has to do with siphoning static electrity without returning it. Building an ever growing (and unstable) positive terminal.
Like digging a hole and using that dirt to build a house that needed the flat ground as a foundation.
Yes, exactly
The "ether", aka "electricity". We're swimming in it. It's what makes YOU go too.
Yes, but without a potential gradient you can't get any work done. I used the stored solar fusion energy from food to get that gradient.
This has nothing to do with ether or anything esoteric.
The electrons come from the anode side of the capacitor during the charge cycle. This is just using electrostatic to pull them and concentrated them.
What is this "electrostatic"?
No, think of it like a heat pump. With a heat pump you spin a compresser with X number of watts and you take existing heat from one location and concentrate it in another location and the number of watts of heat that is relocated is determined by the COP of the heat pump.
Q = Pout / Pin
Air source heat pumps (AC units) have COP ranging from 1.8 to 3 and no one bats an eye, ground source heat pumps have COPs going at as high as 7 and no one criticises that. No one complains about the heat pump, they just accept that the produced heat is useless because it kind of is, unless you're pumping the heat out of extreme depth, then you boil water with it and everyone is happy to accept it.
This is like that.
Instead of forcing electrons around with magnetics, we're simply encourageing them to get where we want by contsantly altering their environment.
Like with the heat pump, it's easier to modulate the environment and let the electrons do what they want in that environment, than to force them to do what you want with electromagnetics in any environment.
The result is a co-efficient of perfromance.
It's the difference between forcing it to happen, and allowing it to happen.
Correct. It's not about "free" energy. It's about the the output relative to YOUR input. When you can utilize the environment for the rest, that's where the progress is made. Most people don't know that refrigerators put out more heat than the equivalent energy that we put into the system (COP greater than 1) the rest of the energy is comes from the environment. That doesn't mean it's "free" but if we can get the COP of devices greatly improved then it might as well be free. And if your input to your devices come from environment based generators to begin with then for you it actually would be free, but still at a cost to the environment's energy. Cool stuff.
Do you know of Eric Dollard and his work?
No clue, never heard the name before, I discovered this while studying atmospheric electricity and ways to accelerated charge collection at lower elevations.
He has a lot of material on Youtube and is often focused on the unseen side of electrostatics. He's even written a book about how to calculate multi-phase power systems through Versor Algebra. He's basically taken Heaviside and Steinmetz's equations to the next level so the average lineman could do the math.
That is really what all of this comes down to is the ability to USE electrical energy in ways others have not thought of... the heat pump analogy is a great way to think about it...
Also, the ideas that the earth itself has a resonance like a tuning fork that can be added to or taken away from were things Tesla and others were thinking about 100+ years ago...
People no longer think... and when they do they only think of rules or the word "Can't".