Don't dox me for the love of god please, I have children and I'm just a passionate hobbyist
I made claims. You want the proof, I've got the proof, here's the oscilloscope readings to prove it: https://www.youtube.com/watch?v=bNyyG1ECN2Q&t=195s
That machine currently makes 50 KV sparks.
That machine is pushing milli-amps of current to make those voltages on that resistor. that means that the machine can push that current at 50 KV.
To make a 1 volt drop over a 1 kilo-ohm resistor requires the transfer of 1 milli-amp of current. As you can see in the video: much more than that is made.
If the voltage is drop is 2.5 volts, then the current through the resistor is 2.5 milliamps.
The machine can deliver that at 50,000 volts 50,000 volts * 0.0025 amps = 125 watts
When the machine is perfected, it will make 208 KV and the sparks will have to cross the bars instead of shorting through the insulation.
That drill spins at up to 2700 rpm, it's running on 120 volt, it uses a maximum of 4.6 amps of current. So that drill, at it's maximum output power uses 552 watts. That drill is not being pushed that hard to make what I am already making, I have a 60 watts pump motor that does this just fine other than the fact I need to buy a speed controller so that I don't rip my fittings apart on startup and so that I can stop it from spinning at max speed.
I can't even go over 1200 RPM yet because of balancing issues...
Now obviously, that output is going to need to be rectified and conditioned, but there it is.
It's not even working right yet and the max output is already reaching overunity levels.
Anyone who has any type of free energy device should simply release all the blueprints and technology immediately on a platform like bit-torrent that can’t be shut down. If an inventor thinks they can keep their secret in order to patent it and make a profit, that’s never gonna happen. Worldwide, the patent system is corrupt and controlled by those with money.
When you make a “I have free energy” announcement like the one above you’re simply doxxing yourself. The evil globalists who don’t want low cost energy released will find you and murder you.
👆👆 Yep.... It's truly a wonder the amount of smart capable and scientifically literate people that can think on levels beyond the normal BUT end up in the annals of History because their discoveries were too good and they failed to see they were surrounded by henchmen.
I still recall a man that perfected an engine that ran on WATER. Yep, that happened. He was cautious yet naive about the real dangers that He opened himself up to.
OP, I don't clearly understand what it is you have achieved, my brain doesn't compute the things you speak of, but I do know this..... There is no limitation to what is possible except for the evil in this worlds ability to destroy good and turn it into evil. If what you post here is true and you have achieved a scientific breakthrough your best to release it unto the winds and let it blossom. If you do not and you try to harness it by use of patent or other means in order to profit I can guarantee you that it will never see the light of day nor will you live long enough to see your fruits ripen.
Once you get it perfected, list the items needed to build it, hold a live WebEx walkthrough and build with others, let it escape beyond the walls of control.
Godspeed Op, if you truly feel a breakthrough happened, be very cautious of who you trust!!
Carry On!!!
This is a series of posts. I kept nothing secret, I gave away everything, just look at my post history
If you're referring to this:
https://greatawakening.win/p/16aTHBRY77/free-energy-update-goodies-for-y/
There's nothing there.
I believe you. Just spitting facts. On a different note, did you see the newer videos that explained the new tech that space force is using? I don't understand the technical mumbo jumbo but they apparently can bend space time and slip through the aether. Like that tictac video that showed a craft flying at great speeds just above the ocean and also in the water? I'll try to find, but they described it as a zero point energy.
Carry On!!!
No I did not see that, I've been obsessed for over a month straight. Can you link me? That sounds really cool.
Isn't it funny how if you're primary goal is to heat a location, you could use a wood stove which is condsidered to be up to 80% efficient with modern ones or you could use resistive heaters like baseboard units, which are also considered to be ~100% efficient or you could use a heat pump and freeze one location while simultaneously heating another location and relocate >1.8 times the amount of energy it took to spin the pump.
Somehow people think that isn't free energy... even if the primary goal and intention was to heat a specific thing, a heat pump could be used to give energy to endorthermic chemical reactions.
People say, well the heat wasn't created, the energy came from somewhere else, but so did the energy in the wire for the electric heater, that's kind of a cop-out argument.
I think that free energy is a proven reality and has been since the first heat pump with a coefficient of perfomance over 1.0 has been made.
What's your thoughts on my way of looking at that?
Here to go..... I personally don't like the narrator BUT the info is in here.... Crazy tech
https://youtu.be/A8z_gyo83fc
ty
That's a pretty brilliant summation. The best advice is always to ignore the ones that speak on things they know nothing about, hence the naysayers. It's almost human nature to shun things we don't understand, unfortunately there's more uneducated than educated these days and most of them don't know when to listen.
I'll dig for that info.... I'll post a link in a bit.
I did, look at my previous posts, I gave one of my earlier stl files away for free
I agree with steven greer
I don't understand what this experiment proves. Are you putting all the output power into that 1k resistor? It's rated at about 0.25 Watts, yes? So if you put, say, 1 Watt into it then it will burn up. Clearly it's not smoking so you are putting less than 1 Watt into it. Meanwhile, the drill is consuming a lot more than 1 Watt. That's not over-unity.
Electrostatic machines give you current, they don't supply voltage, they supply current, they will increase the output voltage until something short out internally or until the current being pushed out of the generator matches the current being produced by the generator.
I can run those same outputs with a 2.4 cm spark gap with a humidity level of 38%, which means I get a breakdown voltage somewhere in the viscinity of 20 KV/cm and I am rounding that to 50 KV.
It still produces the same current level, but it produces it at 50,000 kilovolts in order to cross the spark gap.
So that means that I can provide that current at 50 KV.
If I put a 1 kohm load, then I will produce pathetic power.
If I store the power in a capacitor, force the machine the reach it's maximum output voltage and then draw of the power as pulse DC provided at that voltage, then I produce 125W.
So please do a video showing a 125 Watt element glowing. (A resistive element doesn't need DC so your weird pulses will do just fine.)
All in time, I'm still trying to improve my insulation so I get my design voltage of 208 KV.
Then I need to make a rectifiying circuit with some high frequency diodes and get high voltage transistors and make the voltage sentitive timing circuit to fire the transistors to draw off the power and all of that will need to be sealed in epoxy.
I'm not even done making the generator yet lol
Great Job!
Your first sentence was hilarious!
If it’s on YouTube it must be true. I’ll hold my enthusiasm u til electro boom reproduces it
sorry
Edit: Sorry, over-sensitive at the moment.....
He's not calling you a liar. He's merely pointing out that there are thousands of "free energy" videos on YT and not one of them proves a thing - including this one. I appreciate your enthusiam but, until you show power in/power out < 1, the video is meaningless.
Dude, he litterally said that I'm lying until electroboom does it.
He literally didn't - not even figuratively. He wrote "I'll hold my enthusiasm".
You're probably right, I'm running on fumes, I haven't slept much since I started learning about electrostatics.
Calm down. We're all rooting for you. But we need to see the power output. Voltage, current and sparks are impressive but meaningless.
I was personally involved in the making of a similar generator "QEG" but, in the end, after massive expenditure, it failed. We simply couldn't get any insulation to withstand the voltage without breaking down.
https://www.youtube.com/@georgekodar8207/videos
I edited my previous response, I guess I'm feeling more sensitive and tired than I realised. I haven't slept much since I started on electrostatics and designing generators.
I appologised to the other guy.
Woohoo! And be careful. What raver9876 said.
"You can do the math" nope, math isn't my strength. I don't understand this at all but it's great you do.👏👍
What do you think of Safire project.
It's an amazing piece of work, especially considering that they are not making overunity claims.
The other thing is that people criticise the plasma cosmology movement because, even though experimental proofs are easy enough to do, they haven't been properly done.
Safire is supposed to rectify that situation in regards to electric sun theory. Some people criticise the team because they don't like the credentials of the engineers working on the project and they think the whole concept is stupid. I find that situation rediculous, like how dare people get mad and ask for proof and then get more mad when people try to find it.
Now they are just making fusion claims that requires fuel and give you energy in proportion to the expenditure of fuel.
Some people might be incredulous about their power-in vs power-out since it is orders of magnitudes more efficient than other methods of performing fusion, however, breakthroughs in science and energy are typically called "breakthroughs" because they are leaps in scientific advancement, i.e. some barrier has been broken or circumvented.
Yeah, no. I think you are missing some fundamental understanding of electronics.
First of all, put a capacitor in parallel to the resistor so that your poor oscilloscope can display the voltage more clearly. Ideally, convert your AC to DC to make the math easier. Or measure your waveform and take the root mean square of the signal to make it comparable to DC in terms of power.
Measure the current going through the resistor directly.
You will find you are putting in ~100W into your drill and getting maybe a tenth of a Watt into your resistor.
Here's another with the circuit you specifically requested in full. https://www.youtube.com/watch?v=fpg77RD_fEI
I even used my kids tablet so I could record the oscilliscope at the same time as the digital multimeter.