Imagine That
(media.greatawakening.win)
Comments (34)
sorted by:
And he just happened to not be in the building that day along with his adult children who had breakfast with him daily.
And had weekly phone call’s with Netanyahu.
Against acts of terror specifically 😒
The level of coincidences is astounding
The beams were cut/weakened and maybe even detached from the bedrock before the first plane hit as evidenced by seismic activity before the first hit.
There's no way that much steel can collapse down to its lower floors without the above.
And they happened to drop nicely vertically. Try that with a nice game of Jenga.
Jenga, Jenga, J-J-J-Jenga proves this much too.
My Dad was supposed to do business with him about a decade before 911. He said this guy was a crooked bastard and turned down the deal.
Larry really looks Jewish.
One wasn't even hit by a plane
This is the best Nine Eleven documentary I have seen
Was that one shot down? The “ground swallowed it up” in Pennsylvania.
"Pull it" ~ Larry Silverstein
The 3rd building saw what happend to the other two and out of fear collapsed also!
jews Jewish supremacy and their infiltration into governments Will have one city state filled with them being Elysium and the rest of the world in hell.
To deny Zionism is to be ignorant or plain complicit in evil.
I have a theory, I think it’s possible that from the very beginning the twin towers were meant to come down. Could it be possible that the insulation sprayed onto the red iron during construction could have been a key component for its demolition? People have speculated about nano thermite, in fact analysis of samples points to this possibility. Thermite is nothing more than powdered iron and is hard to ignite, a magnesium ribbon is used to get it burning. If you add an oxidizer such as potassium perchlorate it can burn very fast. So imagine during the towers construction, insulation was sprayed with a very high concentration of iron powder, magnesium dust and potassium perchlorate “or other oxidizer” with a cellulose binder, then on 9/11 microwaves were directed at the building or other more traditional ignition source causing the magnesium and potassium to ignite thus igniting the thermite and causing catastrophic failure of the support structure. Could it be possible that the twin towers were primed from the very beginning, a time bomb sitting dormant for years waiting for the right time to set it off? Why microwave’s, many speculate that there were no planes that hit the towers at all, let’s assume they did. The puppet masters would know this attack would be analyzed from every angle, every frame of footage would be scrutinized. They could not control however the “exact” impact point I believe, too much room for error and too many unknowns. Microwave ignition would allow the event to occur and choose the exact point after the event to cause the ignition and ultimately the failure. This theory doesn’t imply that the building designers or construction personnel had any knowledge of this plan, to them it would have been just another construction project completely unaware of what was actually being baked into the mix.
...it was the asbestosis used during construction, the towers were condemned by the Port of NYC, how else are u going to remove it
This guy is such a fucking Ghoul.
Muh conspiracy
My thoughts: There's no way this guy is sitting on a beach somewhere counting his insurance money. White Hat's have had 20 years to catch him. Like Q says, Use Logic.
Steel wins every time...
https://youtu.be/9k319Qfm01A?si=SjgYtrX0zbwjbwjn
You sound like a conspiracy theorist? None of these trucks were in fire with jet fuel /s
(I know, if kerosene doesn’t melt kerosene lamps it can’t melt aluminum planes)
That same kerosene burns at 2,000 degrees inside the hot section of the engines that hit the building.
You just need to add a lot of air. I don't know the winds that day, but a 10 plus mile an hour wind would raise the temperature a lot. Blacksmiths even today use hand pumped bellows to heat steel and if they leave it in to long they can melt it.
I'm an aircraft mechanic, I also belive that the planes could do the damage shown, they don't need to cut the steel beams, just break the bolts or rivets at the connection. I do structural work on planes like this everyday, they are built far stronger than most people think.
I do belive that the deep state/ clowns in america set it up.
Time is irrelevant.
You could put steel in a 2000 degree oven forever and it wouldn't melt because it simply isn't reaching the (much higher) melting point of 2500F.
The same wind that would bolster temperatures can also ferry the heat away, as would happen in that case as the buildings were not furnaces designed to trap heat and there were big gaping holes for it to escape through.
The strength of a plane aside, you are definitely correct that they only need to destroy rivets and other supporting structural objects, but the truth was never really said.
Also it is unlikely it would fall like a planned demolition as it did without significant aid.
You can bend a red hot iron bar, by hand that you couldn't bend when it was cold. Steal loses much of its strength far below its melting point,and to be honest it would extremely hard to come up with the temperature of that fire without doing an actual experiment on a similar building.
And it very well could have been helped by dynamite, I have no evidence or opinion on that.
What I do know is that yesterday, I removed a large skin off the wing of large aircraft, and I used a crane. I set it on the ground and it took 6 men to lift one side and flip it over. That skin was made of 7075 t- 6 aluminum, it's damn near as hard as steel......
Via 'design students'
That was dynamite.
Try to keep up.
The fire dept bought down WTC 7 on instructions from Mr Silverstein.
https://files.catbox.moe/nsy2jz.mp4
Ruok?